GV350CEU

В наличии

LTE Vehicle Tracker with CanBus Support

  • LTE Cat 1 with 2G fallback
  • Built-in CANBus and J1708 Bus for reading advanced vehicle data
  • DTC and J1939 Supported
  • Multiple I/Os support diverse accessories such as temperature and fuel monitoring sensors
  • Supports BLE 5.2
  • RS232 Serial Port
  • 1-wire interface
  • Geo-fences
  • Tow Alarm
  • Crash Detection
  • Driving Behavior Monitoring
  • OTA Control
  • Temperature Monitoring
  • Driver Identification
Compare
Сделать запрос о продукте

Сделать запрос о продукте

    Артикул: SKU-2286 Категория: Метки: , , , Brands:
    Описание

    The GV350CEU is the new generation advanced telematics solution equipped with LTE Cat 1 and high precision positioning GNSS modules. It can read advanced vehicle data from heavy trucks (CAN and J1708), light commercial vehicles and passenger cars without interfering with vehicle bus wiring or vehicle data ports. With multiple interfaces, the device supports a wide range of pre-integrated accessories either of Queclink or from our selected partners via RS232 serial port and 1-wire interface, providing additional functions such as fuel level monitoring and driver identification. Its built-in BLE allows connectivity to diverse wireless accessories such as BLE beacons and temperature monitoring sensors.

    Specifications

    LTE Specifications

    Operating Band LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B20/B28
    Data Transmission LTE-FDD: Max 10Mbps (DL)/Max 5Mbps (UL)

    EGPRS Specifications

    Frequency 850/900/1800/1900 MHz
    Data Transmission EDGE: (DL) Max 236.8Kbps/(UL)Max 236.8Kbps
    GPRS: (DL)Max 85.6Kbps/(UL)Max 85.6Kbps

    General Specifications

    Dimensions 94(L) x 58.5(W) x 21(H)mm
    Weight 94g
    Backup Battery Li-Polymer, 250 mAh
    Operating Voltage 8V to 32V DC
    Operating Temperature -30℃ ~ +70℃
    -40℃ ~ +80℃ for storage
    Operating Humidity 0%~95% non-condensing
    BLE Support BLE 5.2 protocol

    GNSS Specifications

    GNSS Type u-blox All-in-One GNSS receiver
    Constellation Support GPS,Glonass,Galileo,Beidou
    Sensitivity Cold start: -148 dBm
    Hot start: -160 dBm
    Tracking: -167 dBm
    Position Accuracy (CEP) Autonomous: < 2m
    TTFF (Open Sky) Cold start: 24s average
    Hot start: 1s average

    Interfaces

    Digital Inputs 1 positive trigger input for ignition detection
    3 negative trigger inputs for normal use
    Analog Inputs 2 analog input (0V-16V),1 analog input(0-30V)
    Digital Outputs 5 digital outputs
    Latched Digital Output 1 digital output one with internal latch circuit, open drain, 150 mA max drive current
    Serial Port 1 RS232 serial port on 22 pin Molex type connectors, for external devices
    Cellular Antenna Internal only
    GNSS Antenna Internal antenna
    BLE Antenna Internal only
    LED Indicators Cellular network, GNSS, Power status, CAN status
    Mini USB Interface Used for configuration, upgrade and debug
    CAN Interface CAN1:Support CAN-bus in truck and passenger car
    CAN2:Support CAN-bus in OBD II and J1708
    One Wire Interface VDD,DATA for one wire

    Air Interface Protocol

    Transmit Protocol TCP, UDP, SMS
    Scheduled Report Report position and status based on preset time intervals, distance, mileage or a combination of these settings
    Geo-fences Geo-fence alarm and parking alarm, support up to 20 internal geo-fence regions
    Low Power Alarm Alarm when backup battery is low
    Power On Report Report when the device is powered on
    Tow Alarm Alarm for tow event in ignition-off state
    Driving Behavior Monitoring Aggressive driving behavior detection, including harsh braking, acceleration, etc.
    Crash Detection Accident data collection for reconstruction and analysis
    Special Alarm Special alarm based on digital/analog inputs
    Remote Control OTA control of digital outputs
    Downloads

    No downloads available for this product.

    Прокрутить наверх
    Закрывать
    Закрывать