GV300

В наличии

Advanced Vehicle Tracker

Best-seller: a large number of successful GV300 deployments worldwide
Multiple interfaces, including a RS232 serial port, as well as digital and analog I/O
Supports various accessories, such as CAN adapter as well as temperature and humidity sensors
Ideal for fleet management, cold chain logistics and transportation monitoring
Multiple I/O Interfaces
RS232 Serial Port
Two-way Audio Interfaces
OTA Control
Scheduled Timing Report
Geo-fences
Low Power Alarm
Power On Report
Antenna Disconnect Alarm
Garmin FMI Support
Crash Detection (GV300)
Driving Behavior Monitoring
Tow Alarm
Fuel Level Monitoring
Support Temperature Sensor
Driver ID Identify
Up to 10,000 Buffer Messages

Compare

Сделать запрос о продукте

GSM Specifications

Frequency	GSM: 850 / 900 / 1800 / 1900 MHz Compliant to GSM phase 2/2+ -Class 4 (2W @ 850/900 MHz) -Class 1 (1W @ 1800/1900 MHz)
GPRS	GPRS multi-slot class 12 (10 by default) GPRS mobile station class B

GNSS Specifications

GNSS Type	u-blox All-in-One GPS receiver
Sensitivity	Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm
Position Accuracy (CEP)	Autonomous: < 2.5m
TTFF (Open Sky)	Cold start: 27s average Warm start: 27s average Hot start: 1s average

General Specifications

Interfaces

Digital Inputs	1 positive trigger input for ignition detection 2 negative trigger inputs for normal use
Configurable Input	1 special input can be configured as a negative trigger digital input or an analog input (0V-16V)
Analog Input	1 analog input (0.3V-16V)
Digital Outputs	2 digital outputs, open drain, 150 mA max drive current
Latched Digital Output	1 digital output with internal latch circuit, open drain, 150 mA max drive current
Serial Port	1 RS232 serial port on 16 pin molex type connector, for external devices (GARMIN protocol support)
Two-way Audio Interfaces	1 differential output 1 single end input
Cellular Antenna	Internal only
GNSS Antenna	Internal antenna and optional external antenna
LED Indicators	CEL, GNSS, PWR
Mini USB Interface	Used for upgrading and debugging

Air Interface Protocol

Transmit Protocol	TCP, UDP, SMS
Scheduled Report	Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences	Geo-fence alarm and parking alarm, support up to 20 internal geo-fence regions
Low Power Alarm	Alarm when backup battery is low
Power On Report	Report when the device is powered on
Tow Alarm	Alarm for tow event in ignition-off state
Antenna Disconnect Alarm	Alarm when external GPS antenna is disconnected
Driving Behavior Monitoring	Aggressive driving behavior detection, including harsh braking, acceleration, etc.
Crash Detection	Accident data collection for reconstruction and analysis
Special Alarm	Special alarm based on digital/analog inputs
Remote Control	OTA control of digital outputs

Недавно просмотренные